Brother International HE-800A Instruction Manual - English - Page 29
Installing the treadle connecting rod
View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4. INSTALLATION 4-14. Installing the treadle connecting rod Install the connecting rod (1) to the treadle lever (2) with the nut (3). 3888Q Fig. A Fig. B 3889Q 3890Q Adjusting the treadle pressure If the machine starts running when your foot is simply resting on the treadle, or if the treadle pressure is too weak, adjust the position (a to c) at which the treadle spring (4) is hooked onto the treadle lever (2). The treadle pressure will increase from position a to position c. Adjusting the treadle return pressure 1. Loosen the nut (5) and turn the bolt (6). * The treadle return pressure becomes heavier as the bolt (6) is tightened, and becomes lighter as the bolt (6) is loosened. 2. Tighten the nut (5). Adjusting the treadle stroke Remove the nut (3), and then move connecting rod joint (7) from the position in figure A to the position in figure B. The treadle stroke will increase by approximately 1.25 times. * This adjustment will also affect the treadle pressure and the treadle return pressure, so these settings should be readjusted if necessary. 21 HE-800A