Brother International HE-800A Instruction Manual - English - Page 15

Installation

Get Brother International HE-800A PDF manuals and user guides View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

4. INSTALLATION ４. INSTALLATION CAUTION Machine installation should only be carried out by a qualified technician. Contact your Brother dealer or a qualified electrician for any electrical work that may need to be done. The sewing machine head weighs more than 56 kg. The installation should be carried out by two or more people. Do not connect the power cord until installation is complete, otherwise the ma-chine may operate if the treadle is depressed by mistake, which could result in injury. Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand is used, the weight of the machine head may cause your hand to slip, and your hand may get caught. All cords should be secured at least 25 mm away from any moving parts. Furthermore, do not excessively bend the cords or secure them too firmly with staples, otherwise there is the danger that fire or electric shocks could occur. Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with correct operation may also occur. Install the belt covers to the machine head and motor. ４-１. Table processing diagram Use the power table which has been specially designed for each sewing machines. Positioning Table/legs assembly Vertical Horizontal Model code BLL-H80-200-01 BLL-H80-201-01 If using a commercially-available table, process it as shown in the illustration below. Note: The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration of the sewing machine. [Vertical positioning] 2194Q 7 HE-800A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
HE-800A
4. INSTALLATION
7
４
. INSTALLATION
CAUTION
Machine installation should only be carried out by
a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may need to
be done.
The sewing machine head weighs more than 56
kg. The installation should be carried out by two or
more people.
Do not connect the power cord until installation is
complete, otherwise the ma-chine may operate if
the treadle is depressed by mistake, which could
result in injury.
Use both hands to hold the machine head when
tilting it back or returning it to its original position. If
only one hand is used, the weight of the machine
head may cause your hand to slip, and your hand
may get caught.
All cords should be secured at least 25 mm away
from any moving parts. Furthermore, do not
excessively bend the cords or secure them too
firmly with staples, otherwise there is the danger
that fire or electric shocks could occur.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Install the belt covers to the machine head and
motor.
４
-
１
. Table processing diagram
Positioning
Model code
Vertical
BLL-H80-200-01
Use the power table which has been specially
designed for each sewing machines.
Table/legs assembly
Horizontal
BLL-H80-201-01
If using a commercially-available table, process it as shown in the illustration below.
Note:
The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration
of the sewing machine.
[Vertical positioning]
2194Q