Brother International HE-800A Instruction Manual - English - Page 88

Program Initialization

Get Brother International HE-800A PDF manuals and user guides View all Brother International HE-800A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

１２. PROGRAM INITIALIZATION 12. PROGRAM INITIALIZATION 3992Q １２-１. Initializing all programs 1. While pressing the RESET key (1), turn on the power switch. * While initializing all programs, all LEDs on the operation panel will illuminate and the buzzer will sound continuously for 8 seconds. 2. Once all programs have been initialized, "- -" will appear in the program number LED (2), and "- - - -" will appear in the parameter display LED (3). Settings which are initialized ࡮Parameters ࡮Memory switches ࡮Production counter and lower thread counter * If any cycle programs have been set, they will also be cleared. 3. Set the feed mechanism to the home position. (Refer to "5-2. Home position detection (preparation)".) １２-２. Initializing a single program 1. Select the number of the program to be initialized, and then turn off the power. 2. While pressing the CUTTER ON key (4), turn on the power switch. * The number of the program that will be initialized will appear in the program number LED (2), and then all other LEDs will illuminate and the buzzer will sound four times. 3. When all parameters of the selected program have been initialized, "- -" will appear in the program number LED (2), and "- - - -" will appear in the parameter display LED (3). Settings which are initialized ࡮Parameters 4. Set the feed mechanism to the home position. (Refer to "5-2. Home position detection (preparation)".) HE-800A 80

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
HE-800A
12. PROGRAM INITIALIZATION
80
１２
. PROGRAM INITIALIZATION
１２
-
１
. Initializing all programs
1. While pressing the RESET key (1), turn on the power switch.
* While initializing all programs, all LEDs on the operation panel will illuminate and the buzzer will sound continuously
for 8 seconds.
2. Once all programs have been initialized, “- -“ will appear in the program number LED (2), and “- - - -“ will appear in the
parameter display LED (3).
Settings which are initialized
Parameters
Memory switches
Production counter and lower thread counter
* If any cycle programs have been set, they will also be cleared.
3. Set the feed mechanism to the home position. (Refer to “5-2. Home position detection (preparation)”.)
１２
-
２
. Initializing a single program
1. Select the number of the program to be initialized, and then turn off the power.
2. While pressing the CUTTER ON key (4), turn on the power switch.
* The number of the program that will be initialized will appear in the program number LED (2), and then all other
LEDs will illuminate and the buzzer will sound four times.
3. When all parameters of the selected program have been initialized, “- -” will appear in the program number LED (2),
and “- - - -“ will appear in the parameter display LED (3).
Settings which are initialized
Parameters
4. Set the feed mechanism to the home position. (Refer to “5-2. Home position detection (preparation)”.)
3992Q