Brother International HL 1850 Users Manual - English - Page 199
LAN Connection, Geräuschemission / Acoustic Noise Emission For Germany Only
UPC - 012502603900
View all Brother International HL 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
APPENDIX LAN Connection Caution Connect this product to a LAN connection that is not subjected to over voltages. Geräuschemission / Acoustic Noise Emission (For Germany Only) Lpa < 70 dB (A) DIN 45635-19-01-KL2 IT power system (For Norway Only) This product is also designed for IT power system with phase to phase voltage 230 V. IMPORTANT - Wiring Information (For U.K. Only) If the power cord supplied with this printer is not suitable for your electrical outlet, remove the plug from the mains cord and fit an appropriate three-pin plug. If the replacement plug is intended to take a fuse then fit a fuse with the same rating as the original. If a moulded plug is severed from the power cord then it should be destroyed because a plug with cut wires is dangerous if plugged into a live socket outlet. Do not leave it where a child might find it. In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362 with the same rating as the original fuse. Always replace the fuse cover. Never use a plug with the cover omitted. WARNING - THIS PRINTER MUST BE PROPERLY EARTHED. The wires in the mains cord are coloured in accordance with the following code: Green and yellow: Ground Blue: Neutral Brown: Live A-29