Brother International HL 1850 Users Manual - English - Page 99
List of Factory Settings, RESET menu in the FACTORY SETTINGS mode: INTERFACE MODE
UPC - 012502603900
View all Brother International HL 1850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
! List of Factory Settings CHAPTER 3 CONTROL PANEL The following table shows the initial factory default settings. ✒ Note • The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table. • The following settings cannot be restored to the factory settings with the RESET menu in the "FACTORY SETTINGS" mode: INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local language for display messages. • The COPY setting is always restored to the factory setting when the printer is turned off and on again. • It is not possible to reset the NETWORK settings from the Control panel. If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information) hold down the Network Test Button of the Network board (NC-4100h) for more than 5 seconds. 3-31