Brother International MFC 3220C Users Manual - English - Page 31
Connections
UPC - 012502607106
View all Brother International MFC 3220C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Unless you are using Distinctive Ring, do not connect a TAD elsewhere on the same phone line. (MFC-3220C) TAD TAD When the TAD is in use, the LCD shows Telephone. Connections The external TAD must be plugged into the back of the machine, into the jack labeled EXT. Your machine cannot work properly if you plug the TAD into a wall jack (unless you are using Distinctive Ring). 1 Plug the telephone line cord from the telephone wall jack into the back of the machine, in the jack labeled LINE. 2 Plug the telephone line cord from your external TAD into the back of the machine, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD's telephone line jack, and not its telephone jack.) 3 Set your external TAD to four rings or less. (The machine's Ring Delay setting does not apply.) 4 Record the outgoing message on your external TAD. 5 Set the TAD to answer calls. 6 Set the Receive Mode to External TAD. (See Choosing the Receive Mode on page 5-1.) INTRODUCTION 1 - 11