Brother International MFC 8500 Users Manual - English - Page 215
Checking the Drum Life, REPLACE DRUM?
UPC - 012502603832
View all Brother International MFC 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Follow these steps to replace the drum unit: 1 Open the front cover. 2 Remove the old drum unit. Place the drum unit on a drop cloth or disposable paper to avoid scattering toner. 3 Hold down the lock lever on the right and pull the toner cartridge out of the drum unit assembly. (See Replacing the Toner Cartridge, Page 22-18.) Lock Lever Discard the used drum unit according to local regulations. If you are not sure of them, call your local Sanitation Department. Be sure to seal the drum unit tightly so toner powder does not spill out of the unit. When discarding used drum units, keep them separate from domestic garbage. 4 Wait to unpack the new drum unit until immediately before installing it. Place the old drum unit into the aluminium bag, and then discard it according to local regulations. 5 Reinstall the toner cartridge into the new drum unit. (See Replacing the Toner Cartridge, Page 22-18.) 6 Reinstall the new drum unit, keeping the front cover open. 7 Press Clear. 8 Press 1 and when the LCD shows ACCEPTED, REPLACE DRUM? and close the front cover. 1.YES 2.NO Caution If toner scatters and your hands or clothes get dirty, immediately wipe off or wash with cold water. Checking the Drum Life You can see the percentage of the drum's life that remains available. 1 Press Menu, 2, 0, 3. 3.DRUM LIFE 2 For five seconds, the LCD shows the available DRUM LIFE percentage of drum life. REMAINING:70% Even if the remaining drum life is 0%, you may continue to use the drum unit until you have a print quality problem. T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 22 - 22