Brother International MFC 8890DW Users Manual - English - Page 182
Checking the remaining life of parts, Reset - reset drum
UPC - 012502622673
View all Brother International MFC 8890DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Checking the remaining life of parts C You can see the remaining life of the machine's drum unit and periodic maintenance parts on the LCD. a Press Menu, 8, 3. 83.Parts Life 1.Drum 2.Fuser 3.Laser Select ab or OK b Press a or b to choose 1.Drum, 2.Fuser, 3.Laser, 4.PF Kit MP, 5.PF Kit 1 or 6.PF Kit 2 1. Press OK. 83.Parts Life 1.Drum Remaining: XX% 1 PF Kit 2 appears only when the optional LT-5300 tray is installed. c Press Stop/Exit. Note The life check will be accurate only if you have reset the drum counter when you installed a new drum unit. It will not be accurate if that part's life counter was reset during the life of the used part. Reset C The following reset functions are available: 1 Network You can reset the print server back to its default factory settings such as the password and IP address infromation. 2 Address & Fax Address & Fax resets the following settings: Address Book (One-Touch Dial, Speed-Dial and Setup Groups) Programmed fax jobs in the memory (Polled TX, Delayed Fax and Delayed Batch) Station ID (Name and Number) Coverpage Msg (Comments) Remote Fax Option (Remote Access Code, Fax Storage, Fax Forwarding, Paging and PC-Fax) Report settings (Transmission Verification Report, Tel Index List and Fax Journal) Setting Lock Password 3 All Settings You can reset all the machine settings back to the settings that were set at the factory. Brother strongly recommends you use this operation when you dispose of the machine. Note Unplug the interface cable before you choose Network or All Settings. 166