Brother International PEDESIGN 5.0 Users Manual - English - Page 95

Contents Before Using Getting Started Design Center 3 When the image transfer between the scanner (or other device) and the driver is complete, the imported image will be pasted in Stage 1. If you were editing a pattern on the design page before the transfer, you will be asked whether you want to save the changes, for example: N Click Yes to save the Design Page first. N Click No to abandon the Design Page. N Click Cancel to do anything else (for example, modify the current Design Page or saving it with another file name). NOTE: TWAIN is an application interface (API) standardization for software controlling scanners, etc. Also, the software itself is called TWAIN. This software supports TWAIN standardized devices, so you can control the scanner and import the image directly. Before using this function, you must go to the "Select TWAIN device" dialog to select a TWAIN device. See also: "Select TWAIN device" on page 86 I Input from Clipboard Purpose: Opens a new design page in Stage 1, and puts the image data on the clipboard. Shortcut key: No shortcut key for this function Toolbar: No button for this function Operation: 1 Click File, then Input from Clipboard. (This can only be done when there is image data on the clip- board.) If the current Design Page is not edited, the Stage 1 design page will open and will show the image data as it was on the clipboard. 2 If the current Design Page is edited, you will be asked whether you want to save the changes, for example: N Click Yes to save the Design Page first. N Click No to abandon the Design Page. N Click Cancel to do anything else (for example, modify the current Design Page or saving it with another file name). 3 Depending on the stage you are currently using and the editing you did, the file to be saved is a *.pel file or a *.pem file or both. See also: "Open" on page 85, "Save" and "Save As" on page 89 Layout & Editing Programmable Stitch Creator Quick Reference Alphabetic Index 87