Brother International PT-2730VP Users Manual - English - Page 26
Turning Power On/Off, Auto Power-Off Time
UPC - 012502626596
View all Brother International PT-2730VP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
GETTING STARTED 3 Insert the tape cassette into the tape compartment, with the end of the tape facing the machine's tape exit slot, and press firmly until you hear a click. When inserting the tape cassette, make sure that the tape and ink ribbon do not catch on the print head. Tape exit slot 4 Close the tape compartment cover. Make sure that the release lever is up when closing the tape compartment cover. The tape compartment cover cannot be closed if the release lever is pressed down. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette, by holding down the Shift key and pressing the Preview key. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed package. Turning Power On/Off Press the Power key to turn the P-touch labeler on. Press the Power key again to turn the P-touch labeler off. • Your P-touch labeler has a power saving function that automatically turns itself off if no key is pressed within a certain time under certain operating conditions. Refer to the Auto PowerOff Time table below for details. • If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the AC adapter, the previous session's information is displayed when the power is turned on. With AC adapter With battery zAuto Power-Off Timez P-touch labeler only Connected to PC 8 hours 8 hours 5 minutes No operation for 1 hour after connection to USB. 19 Turning Power On/Off