Brother International PT-9600 Service Manual - Page 100
Tape Control Motor Excitation-Phase Check Mode G key
UPC - 012502602774
View all Brother International PT-9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
2.7. Tape Control Motor Excitation-Phase Check Mode ( " G " key ) This mode checks the excitation-phase of the tape control motor. Fig. 23 (1) Press the "RET" key. The display shifts to the one as shown in Fig.24. Fig. 24 (2) Press the "1" key to enter the mode for the phase positioning of tape control motor. (3) Shift the phase of the tape control motor by pressing the "Space" key one by one to add the excitation on the selected phase for 3 seconds. On the other hand, change the LCD display at the same time. See the following table (Table 1) showing the combinations of the number displayed on the LCD and the excitation phase of the motor. LCD display 4 3 2 1 Excitation phase of motor CD DA AB BC Table 1 (4) Press the "2" key to enter the mode to set the starting phase of the tape control motor. (5) Use the numeric key to write the starting phase of the tape control motor into the EEPROM. See the following table (Table 2) showing the combinations of the input value and the starting phase of the motor. Input value Starting phase 4 3 2 1 DA AB BC CD Table 2 (6) Press the "6" key while the LCD displays as shown in Fig.23. The display shifts to the Key Check Mode as shown if Fig. 19. III-66