Brother International PT-9600 Service Manual - Page 57
Removing the Main PCB
UPC - 012502602774
View all Brother International PT-9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
[ 9 ] Removing the Main PCB (1) Remove five screws and lift the main PCB as shown below to remove it with pulling the serial connector (PT-9600 only) and the USB connector from the slots of the bottom cover. Screws Screws Main PCB Serial connector (PT-9600 only) USB connector Bottom cover Fig. 3.1-35 Removing the Main PCB (1) (2) Remove the sheet A from the bottom cover. (3) Remove the shield plate D from the bottom cover. Sheet A Shield plate D Bottom cover Fig. 3.1-36 Removing the Main PCB (2) III-23
III-23
[ 9 ]
Removing the Main PCB
(1)
Remove five screws and lift the main PCB as shown below to remove it with pulling the
serial connector (PT-9600 only) and the USB connector from the slots of the bottom cover.
Fig. 3.1-35
Removing the Main PCB (1)
(2)
Remove the sheet A from the bottom cover.
(3)
Remove the shield plate D from the bottom cover.
Fig. 3.1-36
Removing the Main PCB (2)
Serial connector
(PT-9600 only)
USB connector
Bottom cover
Main PCB
Screws
Screws
Sheet A
Bottom cover
Shield plate D