Brother International PT-9600 Service Manual - Page 21
Fig. 2.1-4, Ribbon Feed Mechanism
UPC - 012502602774
View all Brother International PT-9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Adhesive Base Tape Feeding (only for laminated tape cassettes) A laminated tape cassette contains both a transparent laminated tape roll and a separate adhesive base tape roll. When a transparent laminated tape and an adhesive base tape pass through the contact point (between the tape feed roller and tape feed sub roller), they are then bonded together into a single, printed tape. The ink printed on the laminated tape is, therefore, sealed up with the adhesive base tape. Ink Ribbon Feeding (except for AV labels cassettes and stamp tape cassettes) As the main motor rotates, the ribbon drive cam located at the middle of the gear train rotates counterclockwise. When fitted on the ribbon drive cam, the ribbon take-up roll in the tape cassette also rotates to take up the ink ribbon. To apply proper tension to the ink ribbon between the platen and the ribbon drive cam, the feed amount of the ribbon drive cam is slightly greater than that of the tape feed gear. The difference between the feed speeds at the platen and at the ribbon drive cam is absorbed by the clutch spring which is integrated in the ribbon drive cam and allows the cam to slip. This way, the ink ribbon is kept tense, which enables the ribbon to clearly separate from the tape at the stabilized angle after printing. Tape feed roller Tape feed sub roller Platen Main frame Ribbon take-up roll Thermal head ASSY Ink ribbon Roller holder ASSY Ribbon drive cam Fig. 2.1-4 Ribbon Feed Mechanism II-5 Tape feed motor