Brother International PT-9600 Service Manual - Page 73
Reassembling the Roller Release Rod
UPC - 012502602774
View all Brother International PT-9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Reassembling the Roller Release Rod (1) Attach the release rod roller in the slit in the roller release rod. Attach the roller release rod on the shaft of the chassis ASSY. Note: Apply the silicon grease (Shin-Etsu Chemical brand G501) by a rice-grain sized drop to full around of the release rod roller. (2) Attach the release lever on the roller release rod. Secure them using the retaining ring. Note: Apply the silicon grease (Shin-Etsu Chemical brand G501) by a rice-grain sized drop to the rubbing portion between the roller release rod and the release lever. (3) Hook the end of the release lever spring on the hole of the release lever. Hook the other end of the release lever spring on the tab of the chassis ASSY. Release rod roller Apply grease. Roller release rod Roller release rod Release lever Retaining ring Release lever spring Apply grease. Release rod roller Chassis ASSY Fig. 3.2-17 Reassembling the Roller Release Rod III-39