Brother International PT-9600 Service Manual - Page 67
Fig. 3.2-7, Reassembling the LCD Module Unit 2, Fig. 3.2-8, Reassembling the LCD Module Unit 3
UPC - 012502602774
View all Brother International PT-9600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
(2) Insert the diode (SLR-342MC) in the LCD holder and solder it to the LCD PCB ASSY (PT9600 only). Note: Do not mix up the plus and minus pins of the diode. The longer pin is for "plus" while the shorter pin is "minus". (3) Insert the LED PCB ASSY into the hooks "B" in two places of the LCD holder (PT-9600 only). (4) Pass the leads (three harnesses) of the LED PCB ASSY through the slot of the LCD holder and solder it to the LCD PCB ASSY (PT-9600 only). Note: Solder the leads (three harnesses) to the LCD PCB ASSY in accordance with the color indications on the LCD substrate. Diode LED PCB ASSY Hook "B" LCD PCB ASSY LCD holder LCD PCB ASSY Hook "B" Hole Fig. 3.2-7 Reassembling the LCD Module Unit (2) Leads (three harnesses) (5) Reassemble the light plate ASSY to the LCD module unit fixing with the hooks in three places. Hook "A" Light plate ASSY LCD module unit Hook "A" Fig. 3.2-8 Reassembling the LCD Module Unit (3) III-33