Brother International PT-9600 Service Manual - Page 35

CHAPTER III DISASSEMBLY AND REASSEMBLY Safety Precautions (1) The disassembly or reassembly work should be carried out on a grounded antistatic sheet. Otherwise, the LSIs and electronic parts may be damaged due to the electricity charged in your body. (2) When transporting PCBs, be sure to wrap them in conductive sheets such as aluminum foil. (3) When using soldering irons and other heat-generating tools, take care not to damage the resin parts such as wires, PCBs, and covers. (4) Be careful not to lose screws,washers, or other parts removed for parts replacement. (5) Tighten screws to the torque values listed below. Tightening Torque List Location Screw type Tape end sensor PCB LCD support LCD holder Bottom cover Chassis ASSY Half frame unit Main PCB Tape guide AV cassette sensor ASSY Cutter sensor ASSY Carriage motor ASSY Tape control motor Tape feed motor ASSY Thermal head ASSY Eject shaft spring *1 Jog PCB Keyboard plate Eject motor ASSY AV sensor PCB ASSY Taptite, bind B M2.6x8 Taptite, bind B M2.6x8 Taptite, bind B M2.6x10 Taptite, bind B M2.6x8 Screw, bind M3x6 Screw, bind B M2.6x8 Screw, bind M3x6 Screw, pan M1.7x6 Screw, pan M2x4 Screw, pan M2x4 Screw, pan M2.6x3.5 Screw, pan M2.6x3.5 Screw, pan (S/P washer) M3x8 Screw, pan M1.7x3 Taptite, bind B M2.6x8 Taptite, bind B M2.6x8 Screw, pan M1.7x3 Taptite, bind B M2x4 *1 : Only for European versions. Q'ty Tightening torque N•cm (kgf•cm) 2 39.2 ± 10 (4.0 ± 1.0) 4 39.2 ± 10 (4.0 ± 1.0) 12 39.2 ± 10 (4.0 ± 1.0) 3 39.2 ± 10 (4.0 ± 1.0) 4 58.8 ± 10 (6.0 ± 1.0) 5 39.2 ± 10 (4.0 ± 1.0) 1 58.8 ± 10 (6.0 ± 1.0) 1 14.7 ± 5 (1.5 ± 0.5) 2 14.7 ± 5 (1.5 ± 0.5) 2 39.2 ± 10 (4.0 ± 1.0) 2 39.2 ± 10 (4.0 ± 1.0) 2 39.2 ± 10 (4.0 ± 1.0) 2 58.8 ± 10 (6.0 ± 1.0) 1 14.7 ± 5 (1.5 ± 0.5) 3 39.2 ± 10 (4.0 ± 1.0) 6 39.2 ± 10 (4.0 ± 1.0) 2 14.7 ± 5 (1.5 ± 0.5) 1 14.7 ± 5 (1.5 ± 0.5) III-1