Brother International SE725 Operation Manual - Page 20
beside [Wireless LAN Setup Wizard].
![]() |
View all Brother International SE725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Wireless Network Connection Functions Touch beside [Wireless LAN Setup Wizard]. b When the following message appears, touch . e A list of available SSIDs appears. Select the SSID that was noted in step a. c When a connection is established, the following message appears. The screen for entering the network key (password) appears. Memo • When displaying next or previous pages, touch or to search the SSID that was noted. • If the desired SSID is not listed, specify it as described below. 1 Touch in the end of the SSID list. 2 Enter the desired SSID, and then touch . 3 Select the authentication method and encryption mode. • If using a previous connection, touch , and then select the saved SSID. Enter the network key (password) that was noted, and d then touch . 7 1 6 2 Touch f to exit the setup. Use the [Machine name] on page 10 of the settings screen for the wireless LAN function. Memo • While connected, the signal strength can be confirmed by the wireless LAN key in the lower right of the stitch or pattern type selection screen. 3 4 5 1 Text input area 2 Character keys 3 Caps key 4 Space key 5 Letters/numbers/symbols key 6 Cursor keys (Move the cursor to the left or right.) 7 Backspace key (Deletes the character at the cursor's position.) • Once a wireless network connection has been set up, a wireless network connection will be established each time the machine is turned on. However, [Wireless LAN Enable] in the wireless LAN settings screen must remain set to [ON]. 18
![](/manual_guide/products/brother-international-se725-operation-manual-3c3e6c7/20.png)