Brother International SE725 Operation Manual - Page 64
Attaching the embroidery unit
View all Brother International SE725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Embroidering Preparation While pressing in the lever on embroidery foot "Q" e with your finger, place the embroidery foot bar above the needle clamp screw. a b c 1 Embroidery foot bar 2 Needle clamp screw 3 Presser bar Secure embroidery foot "Q" with the presser foot f holder screw, making sure that embroidery foot "Q" is vertical. Attaching the embroidery unit IMPORTANT • Before attaching the embroidery unit, be sure to turn off the machine. Otherwise, the machine may be damaged. • Keep your hands and other objects away from the embroidery carriage and frame when they are moving. Otherwise, damage or malfunction may occur. CAUTION • Do not move the machine with the embroidery unit in place. The embroidery unit may be dropped and cause injury. a b 1 Mounting notch 2 Presser foot holder screw Hold the embroidery foot in place with your right g hand, and then use the included screwdriver to securely tighten the presser foot holder screw. Turn off the machine. a Pull the flat bed attachment off to the left. b Insert the embroidery unit connection into the c connection port until it snaps into place. CAUTION • Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the presser foot. The needle may break, possibly resulting in injury. Touch h to unlock all keys and buttons. Note • Make sure that there is no gap between the embroidery unit and the machine, otherwise the embroidery pattern may not be embroidered correctly. 62