Brother International SE725 Operation Manual - Page 67
Using the embroidery sheet
View all Brother International SE725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Embroidering Preparation Loosen the embroidery frame adjustment screw and a remove the inner and outer frames, placing the outer frame on a flat surface. Separate the inner and outer frame by removing inner frame upward. 1 Inner frame 2 Outer frame a 3 Adjustment screw b c Tighten the adjustment screw while removing any slack g in the fabric by hand. The goal is to have a drum-like sound when the fabric is struck lightly. Place the fabric with the stabilizer material on top of b the outer frame. Have the right side of the fabric facing up. Press the inner frame in from the top of the fabric. c Line up on the inner frame and on outer frame. Memo • You can use the included screwdriver when you loosen or tighten the frame adjustment screw. Tighten the adjustment screw by hand just enough to d secure the fabric. ■ Using the embroidery sheet When you want to embroider the pattern in a particular place, use the embroidery sheet with the frame. With a chalk pencil, mark the area of the fabric you a want to embroider. 4 EMBROIDERY Gently remove the fabric from the frame without e loosening the adjustment screw. Place the embroidery sheet on the inner frame. b Line the mark on the fabric up with the base line on the c embroidery sheet. Memo • This precautionary step will help reduce pattern distortion while embroidering. Press the inner frame in from the top of the fabric f again, lining up on the inner frame and on outer frame. • Press the inner frame into the outer frame. Before beginning to embroider, make sure that the top edges of the inner and outer frames are aligned. Place the inner frame with the fabric on the outer d frame and adjust the fabric if needed to align marks on fabric with the embroidery sheet. • For details, refer to page 64. Remove the embroidery sheet. e 65