Campbell Scientific CR1000KD CR1000 Measurement and Control System - Page 454

Section 11. Glossary 454 ESS Environmental Sensor Station excitation Application of a precise voltage, usually to a resistive bridge circuit. execution time Time required to execute an instruction or group of instructions. If the execution time of a program exceeds the Scan() Interval, the program is executed less frequently than programmed. expression A series of words, operators, or numbers that produce a value or result. Glossary. File Control File Control is a feature of LoggerNet, PC400 and RTDAQ (p. 77) datalogger support software. It provides a view of the CR1000 file system and a menu of file management commands: Delete facilitates deletion of a specified file Send facilitates transfer of a file (typically a CRBasic program file) from PC memory to CR1000 memory. Retrieve facilitates collection of files viewed in File Control. If collecting a data file from a CF card with Retrieve, first stop the CR1000 program or data corruption may result. Format formats the selected CR1000 memory device. All files, including data, on the device will be erased. LNCMD software A feature of LoggerNet Setup Screen. In the Setup Screen network map (Entire Network), click on a CR1000 datalogger node. The File Retieval tab should be one of several tabs presented at the right of the screen. Fill and Stop Memory A memory configuration for data tables forcing a data table to stop accepting data when full. final storage The portion of CR1000 SRAM Memory allocated for storing data tables with output arrays. Final Storage is a ring memory, with new data overwriting the oldest data.