Campbell Scientific CR1000KD CR1000 Measurement and Control System - Page 530

Appendix B. Status Table and Settings Table 121. Status-Table Fields and Descriptions Fieldname Description Variable Type Low12VCount5 Number of times system voltage dropped below 9.6 between resets. When this condition is detected, the CR1000 ceases measurements and goes into a low-power mode until proper system voltage is restored. Integer Low5VCount Number of occurrences of the 5V supply dropping Integer below a functional threshold. CompileResults StartUpCode6 ProgErrors Contains error messages generated by compilation or during runtime. String A flag indicating that the currently running program was compiled due to a power-up reset. Integer The number of compile or runtime errors for the current Integer program. VarOutOfBound7 Number of times an array was accessed out of bounds. Integer SkippedScan SkippedSystemScan8 Number of skipped scans that have occurred while running the current program instance. Does not include scans intentionally skipped as may occur with the use of ExitScan and Do / Loop instructions. Integer The number of scans skipped in the background Integer array calibration. SkippedSlowScan9 The number of scans skipped in a SlowSequence. Integer array. ErrorCalib8 MemorySize The number of erroneous calibration values measured. The erroneous value is discarded (not included in the filter update). Integer Total amount of SRAM (bytes) in this device. Default Range Edit? Yes 0 0-99 Reset by changing to 0 Yes 0 0-99 Reset by changing to 0 0 0 0 or 1 0 0 0 Yes Reset by changing to 0 Yes 0 Reset by changing to 0 Yes 0 Reset by changing to 0 Yes 0 Reset by changing to 0 0 0 2097152 (2M) 4194304 (4M) Info Type Error Error Error Status / Error Error Error Error Error Error Error Status 530