Campbell Scientific CR1000KD CR1000 Measurement and Control System - Page 536

Appendix B. Status Table and Settings Table 121. Status-Table Fields and Descriptions Fieldname Description Variable Type CentralRouters18 Array of (8) PakBus addresses for central routers. Integer array of 8 Beacon Array of Beacon intervals (in seconds) for comms ports. Aliased to: BeaconRS-232 BeaconME BeaconSDC7 BeaconSDC8 BeaconSDC10 BeaconSDC11 BeaconCOM1 BeaconCOM2 BeaconCOM3 BeaconCOM4 Integer array of 9 Verify Array of verify intervals (in seconds) for com ports. Aliased to VerifyRS-232 VerifyME VerifySDC7 VerifySDC8 VerifySDC10 VerifySDC11 VerifyCOM1 VerifyCOM2 VerifyCOM3 VerifyCOM4 Integer array of 9 MaxPacketSize Maximum number of bytes per data collection packet. _ USRDriveSize Configures the USR: drive. If 0, the drive is removed. If Integer non-zero, the drive is created. IPInfo Indicates current parameters for IP connection. String IPAddressEth IPGateway Specifies the IP address for the Etnernet interface. If specified as zero, the address, net mask, and gateway are configured automatically using DHCP. Entered as String / Stored as 4 byte Specifies the address of the IP router to which the CR1000 will forward all nonlocal IP packets for which it has no route. Entered as String / Stored as 4 byte Default 0 Range 0 0 - approx. 65,500 0 0 - approx. 65,500 1000 0 8192 Min 0.0.0.0 All valid IP addresses 0.0.0.0 All valid IP addresses Edit? Yes Yes Yes Yes Yes Info Type Config PB Config PB Status Mem 536