Campbell Scientific CR1000KD CR1000 Measurement and Control System - Page 476

Appendix A. CRBasic Programming Instructions DataInterval Sets the time interval for an output table. Syntax DataInterval(TintoInt, Interval, Units, Lapses) FillStop Sets a data table to fill and stop. Syntax FillStop Note To reset a table after it fills and stops, use ResetTable() instruction in the user program or the support software Reset Tables command. OpenInterval Sets time‐series processing to include all measurements since the last time data storage occurred. Syntax OpenInterval TableHide Suppresses the display and data collection of a data table in datalogger memory. Syntax TableHide A.2.2 Data Destinations Note TableFile() with Option 64 is now the preferred way to write data to a CF card in most applications. See TableFile() with Option 64 (p. 330) for more information. CardFlush Immediately writes any buffered data from CR1000 internal memory and file system to resident CF card (CRD: drive) or Campbell Scientific mass‐storage media (USB: drive). TableFile() with Option 64 is often a preferred alternative to this instruction. Syntax CardFlush CardOut Send output data to a CF card module. TableFile() with Option 64 is often a preferred alternative to this instruction. Syntax CardOut(StopRing, Size) DSP4 Send data to the DSP4 display. Syntax DSP4(FlagVar, Rate) 476