Canon EOS C200 EOS C200 EOS C200B Instruction Manual - Page 119
Resolution/Color Sampling] and [Audio Format MP4] settings cannot be changed., to [CONT STBY
View all Canon EOS C200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Special Recording Modes 4 To stop the continuous recording, open the [Continuous Recording] submenu. > [Æ ! Recording/Media Setup] > [Continuous Recording] 5 Select [STBY] and then press the joystick. • The tally lamp goes out and recording stops on both SD cards. [ÜCONT REC'7] and [REC'6] change to [CONT STBY'7] and [STBY'6], respectively. 6 When you have finished recording, turn off the special recording mode. > [Æ ! Recording/Media Setup] > [Recording Mode] > [Normal Recording] • Selecting a different special recording mode will also deactivate the continuous recording mode. 119 NOTES • You can use only one special recording mode at a time. • When continuous recording mode is activated, if recording on SD card B (continuous recording) is not available, normal recording on SD card A will not be possible either. • When continuous recording mode is activated, recording on SD card B (continuous recording) will continue even in the following cases. - SD card A becomes full. - SD card A is removed from the camera. • When continuous recording mode is activated, the > [Æ " Recording/Media Setup] > [Resolution/Color Sampling] and [Audio Format (MP4)] settings cannot be changed. • If you change the main recording format or system frequency, continuous recording mode will be canceled. • About the time code during continuous recording mode: When the time code mode is set to [Regen.], only the time codes on SD card B will be read out.