Canon EOS C200 EOS C200 EOS C200B Instruction Manual - Page 145

Clip Operations Displaying Clip Information Operating modes: Select [Display Clip Info] in the clip menu to display the selected clip's information screen ([Clip Info] screen). Push the joystick left/right to switch to the previous/next clip. When you have finished, press the CANCEL button to return to the clip index screen. 4 56 1 2 3 7 8 9 10 11 12 13 14 15 16 17 145 1 Thumbnail of the selected clip 2 Thumbnail of the next clip 3 Thumbnail of the previous clip 4 Recording media 6 7 SD card (the one currently selected appears in white) ; CFast card 5 Clip geotagged with GPS information (A 111) 6 Special recording mode (A 114) 7 Clip number / Total number of clips 8 Recording date and time 9 Clip file name (A 61, 62) 10 Compression, bit rate and resolution (A 64) 11 Frame rate (A 64) 12 $ mark/% mark/! mark (A 108) 13 Embedded custom picture file (A 132) 14 Color sampling (A 64) For RAW clips, [RAW] and the color depth appear instead. 15 Clip's start time code 16 Clip's end time code 17 Clip duration Displaying the Lens Information and User Memo Operating modes: From the [Clip Info] screen, push the joystick up to display the [Lens & Q] screen. In this screen you can check details about the lens used to record the clip. If the clip has an embedded user memo, you will see the user memo content in this screen as well. Push the joystick down to return to the [Clip Info] screen. Displaying Custom Picture Settings Operating modes: When displaying the [Clip Info] screen of a clip that has a custom picture file recorded with it, push the joystick down to display the first of four screens with the clip's custom picture settings ([/ Data 1/4] screen). Push the joystick down to display the other three [/ Data] screens  [Lens & Q] screen  [Clip Info] screen.