Canon EOS C200 EOS C200 EOS C200B Instruction Manual - Page 168
Connecting to a Wired (Ethernet) Network, ernet terminal on the camera and an
View all Canon EOS C200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Connecting to a Wired (Ethernet) Network Connecting to a Wired (Ethernet) Network Connect the camera to a router or other device connected to a wired (Ethernet) network using a commercially available Ethernet cable. Use Category 5e, shielded twisted pair (STP) Ethernet cables compatible with Gigabit 168 Ethernet (1000BASE-T) and with good shielding capability. Ethernet port on a network device Ethernet cable (commercially available) (Ethernet) access indicator 1 Connect a commercially available Ethernet cable to the Ethernet port on a network device. (Ethernet) terminal on the camera and an 2 Open the connection method selection submenu. > [ ! Network Settings] > [Connection Settings] > select the desired configuration number* > [Edit] * You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number. 3 Select [Ethernet] and then press the joystick. 4 Continue with the procedure to configure the IP address assignment (A 163).