Canon EOS C200 EOS C200 EOS C200B Instruction Manual - Page 164
Connecting in Infrastructure Mode, Saving the Configuration
View all Canon EOS C200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Connecting to a Wi-Fi Network 164 Saving the Configuration 1 Review the access point's configuration and then press the joystick. • Push the joystick left/right to review additional settings before pressing the joystick. 2 To change the [Network Configuration Name], select [Input] and then press the joystick. • If you wish, you can give the network configuration profile a more descriptive name to make it easier to identify. Enter the desired name using the keyboard screen (A 35). 3 Select [OK] and then press the joystick to save the network configuration. 4 When the confirmation screen appears, press the joystick. Connecting in Infrastructure Mode 1 Open the connection method selection submenu. > [ ! Network Settings] > [Connection Settings] > select the desired configuration number* > [Edit] * You can save up to 4 network configuration profiles in the camera. Push the joystick up/down to select the configuration number. 2 Select [Infrastructure] and then press the joystick. 3 Select the desired network setup method and then press the joystick. • Continue the setup with the procedure corresponding to the method you wish to use (see the reference pages below). [WPS: Button] (A 165) [WPS: PIN Code] (A 165) [Search for Access Points] (A 166) [Manual] (A 167)