Canon PIXMA iP6000D iP6000D Quick Start Guide - Page 74

Handling Error Messages - printer cable

Get Canon PIXMA iP6000D PDF manuals and user guides View all Canon PIXMA iP6000D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

Troubleshooting Handling Error Messages When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Flashes Two flashes Three flashes Four flashes Five flashes Six flashes Eight flashes Nine flashes Possible Cause Try This Printer is out of paper/Paper does not feed Reload paper in the sheet feeder or cassette and press the RESUME button. Paper jam/Paper output tray is closed Clear the jammed paper, reload paper in the printer, then press the RESUME button. If the paper output tray is closed, open it. See "Paper Jams" on page 69. Empty ink tank Press the RESUME button to resume printing with an empty ink tank. Replace it with a new ink tank immediately after the printing. It may damage the printer if you continue printing with an empty ink tank. See "Replacing an Ink Tank" on page 37. Print head not installed/Print head not installed correctly/Defective print head Install the print head. If the print head is already installed, remove the print head and check the electrical contacts for foreign matter, then reinstall. After reinstalling the print head, you may need to realign it. If this error still remains, the print head may be damaged. Contact the Customer Care Center. Inner cover is open Close the inner cover and press the RESUME button. Waste ink absorber* almost full The printer has a built-in waste ink absorber for the ink used during print head cleaning. Eight flashes indicates that the waste ink absorber is nearly full. Press the RESUME button to cancel the error so you can continue printing. Before the waste ink absorber becomes completely full, contact the Customer Care Center. A specified period of time has elapsed without receiving a response from the digital camera/The digital camera or digital video camcorder connected is not compatible with this printer Disconnect the camera cable, press the RESUME button and reconnect the cable. If the error is still unresolved, there is a possibility that you are using a digital camera or digital video camcorder that is not supported by this printer. Use a digital cameras or digital video camcorder compatible with this printer. * The waste ink absorber absorbs ink used during cleaning. 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Troubleshooting
72
Handling Error Messages
When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the appropriate
action to correct the error.
Number of
Flashes
Possible Cause
Try This
Two flashes
Printer is out of
paper/Paper does
not feed
Reload paper in the sheet feeder or cassette and press the RESUME
RESUME
RESUME
RESUME button.
Three flashes
Paper jam/Paper
output tray is
closed
Clear the jammed paper, reload paper in the printer, then press the RESUME
RESUME
RESUME
RESUME
button. If the paper output tray is closed, open it.
See “Paper Jams
Paper Jams
Paper Jams
Paper Jams” on page 69.
Four flashes
Empty ink tank
Press the RESUME
RESUME
RESUME
RESUME button to resume printing with an empty ink tank. Replace it
with a new ink tank immediately after the printing. It may damage the printer if you
continue printing with an empty ink tank.
See “Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank” on page 37.
Five flashes
Print head not
installed/Print head
not installed
correctly/Defective
print head
Install the print head. If the print head is already installed, remove the print head
and check the electrical contacts for foreign matter, then reinstall.
After reinstalling the print head, you may need to realign it.
If this error still remains, the print head may be damaged. Contact the Customer
Care Center.
Six flashes
Inner cover is open
Close the inner cover and press the RESUME
RESUME
RESUME
RESUME button.
Eight flashes
Waste ink
absorber* almost
full
The printer has a built-in waste ink absorber for the ink used during print head
cleaning.
Eight flashes indicates that the waste ink absorber is nearly full.
Press the RESUME
RESUME
RESUME
RESUME button to cancel the error so you can continue printing.
Before the waste ink absorber becomes completely full, contact the Customer Care
Center.
Nine flashes
A specified period
of time has elapsed
without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
Disconnect the camera cable, press the RESUME
RESUME
RESUME
RESUME button and reconnect the cable.
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer.
Use a
digital cameras or digital video camcorder compatible with this printer.
*
The waste ink absorber absorbs ink used during cleaning.