Canon PowerShot SX620 HS User Manual - Page 20

3 Compose the shot. ●●To zoom in and enlarge the subject, move the zoom lever toward [ ] (telephoto), and to zoom away from the subject, move it toward [ ] (wide angle). 4 Shoot. Shooting Still Images 1) Focus. ●●Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and frames are displayed to indicate image areas in focus. ●●If [Raise the flash] is displayed, move the [ ] switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera. 2) Shoot. ●●Press the shutter button all the way down. ●●As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically. ●●Keep the camera still until the shutter sound ends. ●●After displaying your shot, the camera will revert to the shooting screen. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes Recording Movies P Mode 1) Start recording. ●●Press the movie button. The camera Playback Mode beeps once as recording begins, and [ Rec] is displayed with the elapsed (1) time (1). ●●Black bars are displayed on the top and Wi-Fi Functions Setting Menu bottom edges of the screen, and the subject is slightly enlarged. The black Accessories bars indicate image areas not recorded. ●●Frames displayed around any detected Appendix faces indicate that they are in focus. ●●Once recording begins, take your finger Index off the movie button. 2) Finish recording. ●●Press the movie button again to stop recording. The camera beeps twice as recording stops. 20