Canon REALiS WX6500 Pro AV User Manual - Page 108
Fan mode, Vertical projection
View all Canon REALiS WX6500 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Menu Description Fan mode Switch the fan mode to suit installation at low or high altitudes (above 2,300 m (7,545.8')). Option Function Normal Setting for altitudes lower than 2,300 m (7,545.8'). High altitude Setting for altitudes of 2,300 m (7,545.8') or higher. • Incorrect settings may shorten the useful life of the lamp or other parts. • The lamp mode is set to [Power saver] and cannot be changed when [Install settings] > [Fan mode] is set to [High altitude]. Vertical projection You can ensure adequate cooling by switching the fan mode to suit upward- or downwardfacing installations. For precautions on vertical projection, see "Install Facing in the Correct Direction" (P25). Option Function Off Does not alter the fan mode. Upward Setting for use when the projector faces upward. Downward Setting for downward projection. • Be sure to perform this setting to use vertical projection. • Projecting vertically without using this setting will shorten the useful life of the lamp and other parts. • Even if you complete this setting, vertical projection will result in a shorter useful life of the lamp and other parts than horizontal projection. 108