Canon REALiS WX6500 Pro AV User Manual - Page 58

Projection Procedure ■ Windows Vista 1 Open the [Control Panel] from the start menu, then select [Appearance and Personalization] - [Adjust screen resolution] in the [Control Panel Home]. 2 Select the resolution closest to the maximum output signal resolution of the projector from the [Resolution] list. 3 Click the [OK] button. ■ Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the [System Preferences] window, click the [Displays] icon to display the Display window. 3 Select the [Display] tab and select the resolution closest to the maximum output signal resolution of the projector from the [Resolutions] list. 4 Close the [System Preferences] window. Auto PC Adjustment If the image display is shifted or there is flickering of the screen when [Analog PC-1] or [Analog PC-2] is selected, press the AUTO PC button to adjust the projector to the optimal condition. The adjustment results will be stored. If the projector is used again with the same computer, when the input signal is selected the image will be projected automatically under the same conditions that were previously adjusted. Remote control If the Auto PC adjustment is insufficient, perform the following operations. • Select the input signal that matches the resolution of the computer from [Input signal select]. (P91) • If adjustment is insufficient even when using the above operation, adjust [Total dots], [Tracking], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical pixels] in [Input signal settings]. (P92) • For the signal types supported by the projector, see the table on page 188 to 189. 58