Canon REALiS WX6500 Pro AV User Manual - Page 119

Advanced Guide Menu Description Menu Description To Unlock Key Lock Function Turn off the projector and unplug the power plug. Hold down the OK button on the main unit and plug in the power cord, as you continue to hold down the OK button. In a moment, a beep will sound, and the controls will be unlocked. When you access this setting from the projector's side controls, [Main unit] is not available. Similarly, when you access the setting from the remote control, [Remote (wireless)] is not available. Remote control channel Separate channels can be assigned to up to four projectors so that a single remote control can be used with each projector. Selecting the Projector Channel If an optional wired remote control (RS-RC05) is used, there is no need to set the remote control channel. Option Function Ch1 Ch2 Ch3 Select the remote control channel to use with this projector. Ch4 Independent Can be controlled from a remote control set to any channel. Selecting a Channel on the Remote Control After changing the projector channel from the menu, always change the remote control channel accordingly. Ch1 Ch2 Ch3 Ch4 Independent Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and [ ] button for 3 seconds. Hold both the OK button and MENU button for 3 seconds. Audio in terminal select Select the source terminal for audio output. Option Function Off No audio is output. Audio in 1 Use audio signals from AUDIO IN 1 for audio output. Audio in 2 Use audio signals from AUDIO IN 2 for audio output. HDMI Use HDMI audio signals for audio output. HDBaseT Use HDBaseT audio signals for audio output. Use LAN audio signals for audio output. Audio is transferred by the NMPJ application. LAN Audio is transferred via the port selected in [Communication settings] > [Wired network] (P120). 119