Canon REALiS WX6500 Pro AV User Manual - Page 160
Selecting an Image for Projection, Selecting a Drive, Changing the View, Operating the Projected Image
View all Canon REALiS WX6500 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Advanced Projection Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and projecting on the screen. ■ Selecting a Drive This step may not be necessary when a USB flash drive is connected directly to the projector's USB port. If a USB memory card reader having multiple memory slots is connected, the drive (memory slot) list is displayed in the file list. Select the drive in which the memory card is inserted with [ ] / [ ], and press the OK button. • Active drives are displayed in white text, while inactive drives are grayed out. ■ Selecting a Folder In list view, folders that contain images can be selected. • To return to the higher level, select [ ]. ■ Selecting an Image File for Projection When you select an image file, a small preview of the image is shown in the preview area. For full-screen projection of the image, press the OK button. To return to the higher level, select [ ]. ■ Changing the View To switch the view, select [Thumbnail view] or [List view] in the drive or file list and press the OK button. Operating the Projected Image When images are projected, you can perform the following operations. Project the previous or next image by pressing the [ ] / [ ] buttons. Rotate images left or right 90° by pressing the [ ] / [ ] buttons. Return to the USB file browser by pressing the OK button. • These operations are also available during slideshows. (Except during transitions.) • If the image contains rotational information, the image is rotated to an appropriate direction automatically. 160