Canon REALiS WX6500 Pro AV User Manual - Page 127
Network settings, Network Connection Overview, Connection Methods
View all Canon REALiS WX6500 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Network settings Menu Description Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary. The following is an explanation of preparation on the computer side. Connection Methods To connect the projector to a computer network, use a LAN cable. The LAN cable can be connected to either the LAN port or HDBaseT port. When using the LAN port, connect the projector as follows. Advanced Guide Menu Description Hub or router, etc. LAN cable (shielded twisted pair; not included) LAN terminal When using the HDBaseT port, connect the projector as follows. LAN cable (CAT5e or better, shielded-compatible; sold separately) HDBaseT transmitter LAN cable (CAT5e or better, shielded-compatible; sold separately) HDBaseT port • The LAN port and HDBaseT port cannot be used at the same time for a network connection. • Network connectivity provided by the HDBaseT port and LAN port is identical, except that the HDBaseT provides a maximum transfer speed of 100 Mbps. • When the [Network function] setting of the projector is set to [Off] (Network Connections is disabled), switch it to [On] to enable it. (P131) • Select which port to use in [Communication settings] > [Wired network] (P120). • Referring to "Checking Projector Information" (P156), confirm that the projector's IP address is not the same as that of other computers on the network. To set a projector IP address, follow the instructions in "Controlling the Projector from a Computer" (P154) and use the web screen, or use projector TCP/IP settings. (P132) 127