Canon RM-25 V1.0 Network Video Recording Software RM-Lite Ver.1.0 Administrato - Page 34

Configure a Storage Server You can specify the storage period of the recorded images and the maximum disk usage. Display the [Servers] Tab 1 Click [Settings] > [Storage Servers]. The [Servers] tab is displayed in the [Settings] dialog box. ➀ ➁ ➂ ➃ ➀ List of Storage Servers Display a list of Storage Servers. ➁ [Add], [Edit], and [Remove] Edit a Storage Server. [Add] or [Remove] are not available with RM-Lite. ➂ [Recorded Video Settings] Specify the minimum and maximum storage period for recorded images. ➃ [Close] Close the dialog box. „ Specify the Storage Period for Recorded Images You can specify the storage period for images recorded on the Storage Server. • Select the [Ensure video is kept for at least] check box to specify the minimum storage period. Select the units (days or weeks) of the storage period and enter the number of days (1 to 90) or weeks (1 to 12). • [Ensure video is kept for upto] is always enabled. You cannot disable it. Select the units (days or weeks) of the storage period and enter the number of days (1 to 90) or weeks (1 to 12). Important Depending on the maximum disk usage setting for the Storage Server (P. 3-6), recordings may not be stored for the full storage period specified in this setting. Change the Destination of the Recording File and the Maximum Disk Usage Specify a drive for recording or change the maximum disk usage. 1 Select a Storage Server from the list of Storage Servers. 2 Click [Edit] to display the [Storage Server Settings] dialog box. 3 Clear the check boxes next to the drives that are not used for recording. 4 Specify the maximum disk usage. Click [Do not limit] for each drive to display the maximum disk usage. Select the [Maximum Disk Space Used] check box and specify a maximum disk usage that does not exceed the total disk capacity. 3-6