Canon RM-25 V1.0 Network Video Recording Software RM-Lite Ver.1.0 Administrato - Page 37

Add a Camera Important • Enter the camera's user name and password in [User Name] and [Password]. • If the host name or IP address of the camera is changed after registration, you must also change the Storage Server setting. For details, see "Edit Camera Information" (P. 3-10). Note • You can only search for cameras on the same subnet as the Storage Server. For details on how to add cameras on a different subnet, see "Add Cameras One at a Time" (P. 3-8). 3 • The names of the cameras (stored on the camera) are displayed in the list in the [Camera Search Results] dialog box. • Cameras that have already been added are also found. However, a check box is not displayed next to the camera. Storage Server Settings Search For and Add Cameras You can search for cameras that are on the same network as the Storage Server. • If you cannot find the camera you are searching for, see "Add Cameras One at a Time" (P. 3-8) and add the camera. • Only IPv4 addresses are displayed in the [Host Name] column of the [Camera Search Results] dialog box. (IPv6 addresses are not supported.) 1 Click [Find]. The cameras on the subnet are displayed in the [Camera Search Results] dialog box. 2 Select the check box of a camera you want to add. To select all the cameras, click [Select All]. You can add more than one camera by selecting multiple check boxes. 3 Click [Add]. The [Add Camera] dialog boxes for the cameras selected in step 2 are displayed in the order of the [Camera Search Results] list (from top to bottom). 4 Enter the information required to add the camera, referring to step 2 in "Add Cameras One at a Time" (P. 3-8). 5 Click [OK] to close the dialog box. 6 Repeat steps 4 and 5. 7 When all the cameras are added, click [Cancel]. 3-9