Canon RM-25 V1.0 Network Video Recording Software RM-Lite Ver.1.0 Administrato - Page 39

Add a Camera „ Change the Thumbnail Image of a Camera Remove a Camera You can change the thumbnail image of a camera. In the [ Properties] dialog box, click the [General] tab and click [Update] to display the 1 Select a camera in the list of cameras on the [Cameras] tab. 3 [Thumbnail] dialog box. 2 Click [Remove]. Storage Server Settings ➀ ➁ ➂ ➃ ➀ Preview image Drag the slider to change the zoom position of the camera. Click in the preview image to change the camera position. ➁ [Select Preset] Select a preset image stored on the camera. ➂ [Update] Use the current preview image as the camera thumbnail image. The [Thumbnail] dialog box closes and the camera thumbnail image is updated. ➃ [Cancel] Close the dialog box without updating the thumbnail image. 3 A message is displayed asking if you want to remove the camera. Click [Yes]. Important If you remove a camera, you will no longer be able to play back recordings made with the camera. If you need to play back the recordings, use [Disable Camera] on the [Advanced] tab instead of removing the camera. You cannot use the pan/tilt/zoom feature. • You cannot use the pan/tilt feature. • You cannot use the zoom when the digital zoom is set to [Disabled] on the camera. Note You must configure the presets first before starting operation. For details, see the camera manual. 3 - 11