Canon VB-R12VE Network Video Recording Software RM Series Administrator s Manu - Page 49

Search For and Add Cameras You can search for cameras that are on the same network as the Storage Server. 1 Click [Find]. The cameras on the subnet are displayed in the [Camera Search Results] dialog box. 3 Storage Server Setup 2 Select the check boxes for cameras to add. You can add more than one camera by selecting multiple check boxes. To select all the cameras, click [Select All]. 3 Click [Add]. The [Add Camera] dialog boxes for the cameras selected in step 2 are displayed in the order of the [Camera Search Results] list (from top to bottom). 4 Enter the information required to add the camera, referring to step 2 in "Add Cameras One at a Time" (P. 47). 5 Click [OK] to close the dialog box. 6 Repeat steps 4 and 5. 7 When you finish adding cameras, click [Cancel]. Note • You can only connect to cameras that are located on the same subnet as the computer on which RM Manager is installed. For details on how to add cameras on a different subnet, please refer to "Add Cameras One at a Time" (P. 47). • The names of the cameras (stored on the camera) are displayed in the list in the [Camera Search Results] dialog box. However, the VB-C300 camera name is not displayed. • Cameras that have already been added are also found. However, a check box is not displayed next to the camera. • If you cannot find the camera you are searching for, please refer to "Add Cameras One at a Time" (P. 47) and add the camera. • Host names or IPv4 addresses are displayed in the [Host Name] column of the [Camera Search Results] dialog box. (IPv6 addresses are not supported.) Change Camera Information You can change the camera registration information, 1 Select the appropriate camera and click the [Edit] button. Camera properties are displayed. 49