Canon VB-R12VE Network Video Recording Software RM Series Administrator s Manu - Page 90
Aperture Mode], Infrared], White Balance], Disable the Night Mode function.
![]() |
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Note When [Clear IR Mode] is set to [On], both the displayed and recorded video will be black and white. (6) [Aperture Mode] Specify the camera aperture mode. [Night Mode] • [Disabled] Disable the Night Mode function. • [Enabled] Record in Night Mode. • [Auto] The camera automatically decides when to switch to Night Mode. When recording ends, the Night Mode setting returns to the value before recording started. Important When [Clear IR Mode] is set to [On], [Night Mode] cannot be specified. Note When [Night Mode] is enabled in [Aperture Mode], both the recorded and displayed video is in black and white. (7) [Infrared] Specify whether or not to use infrared lighting during night mode. Cameras without the infrared lighting feature will always be set to [Not supported]. [Off]: Record with infrared lighting disabled. [Day/Night Operation]: Use infrared lighting together with night mode. Infrared lighting will be irradiated during night mode. [1] to [5]: Select one of five strength levels for the infrared lighting used during night mode when [Exposure] is set to [Manual]. Important When [Clear IR Mode] is set to [On], [Infrared] cannot be specified. (8) [White Balance] Specify the white balance to be applied during recording. If [Manual] is selected, use one of the following two methods to adjust the white balance. • [R Gain] and [B Gain] Specify the white balance parameters by dragging the sliders. Drag to the right to increase the gain (the sensitivity to brightness). • [One Shot WB] Force white balance adjustment to a light source. Using a white object (such as a piece of white paper) as a standard, fill the shot with the object and click this button. C300 C50F C50i It may take approximately 30 sec. for [Exposure], [Night Mode] and [White Balance] settings to be reflected in the view after recording starts. Important When [Clear IR Mode] is set to [On] or when [Night Mode] is set to [Enabled], the white balance cannot be specified. If you select [Auto] for Night Mode, however, you will be able to set the white balance, but the settings will be cleared when the camera switches to Night Mode. 90
![](/manual_guide/products/canon-vbr12ve-network-video-recording-software-rm-series-administrator-s-manual-2ffc08b/90.png)