Canon VB-R12VE Network Video Recording Software RM Series Administrator s Manu - Page 76

If you select [Not Specified], the camera's resolution setting is used for recording. (2) [Video Format] Specify the video format ([JPEG], [MPEG-4] or [H.264], etc.). The available formats depend on the camera model. (3) [Maximum Frame Rate] Specify the maximum frame rate (number of frames recorded in one second) in the range from 0.1 to 30 frames per second (fps). (4) [Record audio if available] Select this check box if you want to record audio together with the video. (5) [Advanced] Displays the [Advanced Recording Settings] dialog box (P. 84). (6) [Use the recording-mode stream] Enable the recording stream function. With this function, the camera temporarily stores the video in its own memory before sending it to the Storage Server. This can help reduce the effects of non-uniform network traffic (jitter). Important • You can save JPEG video of the recorded stream to a memory card in the camera using [Use the recording mode stream] if the stream could not be distributed due to a network failure. Video is saved at a frame rate of 1 fps. For details, please refer to the camera manual. • The size of the recording data increases as the resolution and frame rate become higher. Make sure there is sufficient hard disk space available before specifying a higher resolution and frame rate. • If you select [MPEG-4] or [H.264], the [Storage Server] option in [Detect Motion Using] cannot be selected. • Even if the [Record audio if available] check box is selected, audio will not be recorded if the audio sending function has not been activated on the camera. If you schedule a recording, make sure the audio sending function on the camera has been set to [Enable]. Note • If you select [MPEG-4] or [H.264] for the [Video Format] setting, the [Maximum Frame Rate] setting cannot be changed. The settings on the camera are used for recording. • It may not be possible to record at the specified frame rate depending on the load on the Storage Server CPU or the hard disk. Recording may also pause intermittently. • Recording may be performed at lower than the specified frame rate, depending on the number of Viewers that are accessing the camera, the load on the camera and Storage Server, variation in network traffic, and the environment at the time of recording. • Audio recording is enabled when the recording mode is selected. You cannot schedule audio-only recording. • If MPEG-4 or H.264 recording format is used, the recorded audio will not be in sync with the recorded video. If JPEG recording format is used, the recorded audio will be in sync with the recorded video for the most part, however it is not guaranteed that it will be completely in sync. • Recording mode stream operates only with cameras that support the recording mode stream function and if a stream has been acquired. • To use recording mode stream, select [Video Format] > [JPEG] or [Digital PTZ (JPEG)], and set [Maximum Frame Rate] to "10" or less. • When the recording-mode stream function is used, the streamed video has a higher priority than the live video. Depending on the load on the camera, such as the number of Viewers that are simultaneously connected to the camera, display of the live video may stop. S30 S31 S80x S90x H43 H41 H630 H610 H730 H710 M42 M40 M620 M600 M720 M700 C500 C60 If an upload function is already being used on the camera, you cannot use the recording-mode stream function. To use the recording-mode stream function, select [Upload] > [Upload Disabled] on the Setting Page of the camera. M50 H761 H760 [Digital PTZ (JPEG)] cannot be selected for [Video Format]. • Only supports [JPEG] for the [Video Format]. • The maximum frame rate is five fps. 76