Canon VB-R12VE Network Video Recording Software RM Series Administrator s Manu - Page 87
Specify the Option for Recording Before and/or After an Event
![]() |
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Setting a Recording Schedule 6 Repeat steps 2 to 5 for additional presets. 5 Selecting [Return to default focus when the camera is operated] enables you to restore the focus settings to the default ("Auto") during the preset tour. 7 Specify the order of the presets. The tour starts with the first preset and proceeds down the list. Change the order by selecting a preset, and then clicking [Move Up] or [Move Down]. To remove a preset, select the preset and click [Remove]. To edit a preset in the list, select the preset and click [Edit]. 8 Click [OK] to close the dialog box. Important • Using preset tour with MPEG-4 or H.264 format will consume a large amount of disk space. • The preset tour settings can effect the durability of the camera's pan/tilt mechanism. Note • The camera returns to the first preset position after reaching the last preset position. • Click [Start Test] to run through the preset tour once to confirm your settings. About the Warning Message Displayed During the Preset Tour Depending on the preset tour settings, a warning message about the camera's pan/tilt mechanism may be displayed when you click [OK] to close the [Preset Tour Settings] dialog box. If this happens, consider changing the settings. A warning will appear when the pan/tilt mechanisms reach their estimated lifetime of 100,000 round trips over the full range of motion. Specify the Option for Recording Before and/or After an Event You can record a number of seconds before and/or after an event, such as sensor input or Intelligent Function, using the [Recording Options] setting. (1) (2) (1) [sec. before event] Number of seconds to record before an event (max. 30 seconds). (2) [sec. after event] Number of seconds to record after an event (max. 999 seconds). Note • [Recording Options] cannot be specified when setting continuous recording. 87
![](/manual_guide/products/canon-vbr12ve-network-video-recording-software-rm-series-administrator-s-manual-2ffc08b/87.png)