Canon VB-R12VE Network Video Recording Software RM Series Administrator s Manu - Page 79
Using the, torage, erver for Motion Detection, Detect Motion Using], Priority], Frame Rate]
![]() |
View all Canon VB-R12VE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Using the Storage Server for Motion Detection Important • The load on the Storage Server CPU increases when motion detection is performed on the Storage Server. We strongly recommend that you use the motion detection on the camera, if it is available. • If you select [MPEG-4] or [H.264] in [Video Format] of the continuous recording settings, the [Storage Server] option in [Detect Motion Using] cannot be selected. Note If you select [MPEG-4] or [H.264] in [Video Format], the [Storage Server] option in [Detect Motion Using] cannot be selected. Note also that if you select [MPEG-4] or [H.264] in other recording modes besides motion detection recording, the [Storage Server] option still cannot be selected. [Recording Settings] tab [Settings] tab (1) (2) (3) (4) (5) (6) (7) 5 Setting a Recording Schedule (8) (9) (1) [Detect Motion Using] Select [Storage Server] to detect motion using a Storage Server. (2) [Priority] Select the priority of the motion detection events. For details, please refer to "Check Events" (P. 115). (3) [Frame Rate] Specify the motion detection frame rate (frames per second). (4) [Settings Mode] If you select [Simple], [Sensitivity] and [Area Ratio] can only be set using the sliders. [Duration] is fixed at 0.2 seconds. If you select [Advanced], the [Sensitivity], [Area Ratio] and [Duration] settings become available so that values can be set. (5) [Sensitivity] Specify the motion detection sensitivity within the range of 1 to 256. Increase the number to increase the sensitivity. (6) [Area Ratio] Specify the area of the preview video that the Storage Server uses for motion detection. The range is 0 to 100%. The size marker inside the Detection Indicator changes position depending on the value of this setting. (7) [Duration] Specify the length of time the motion signal must be present to decide that there is motion. The range is 0.0 to 5.0 seconds. (8) [Active Region] Displays a preview video from the camera used for motion detection. Displays a dotted-line frame representing the active region on top of the preview video. Drag the frame handles to make it larger or smaller. 79
![](/manual_guide/products/canon-vbr12ve-network-video-recording-software-rm-series-administrator-s-manual-2ffc08b/79.png)