Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 109
Setting Intelligent Function Detection Settings, Setting Detection Criteria [Detection, Criteria] tab
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Setting Intelligent Function Detection Settings Setting Detection Criteria ([Detection Criteria] tab) Set detection criteria while operating the camera and checking the video in the video display area. [Detection Criteria] tab Moving object detection, abandoned object detection, camera tampering detection (1) (2) (3) (4) Removed object detection (1) (2) (3) (4) Passing detection Video Display Area (1) (5) (3) (6) (7) (4) Detection Area Intelligent Function Setting Tool (1) [Detection Settings Name] You can use up to 64 characters in a detection setting name. Be sure to enter a single-byte alphanumeric detection setting name. In a [Detection Settings Name], ASCII characters (spaces or printable characters) can be used. (2) [Area Shape] 4 Select [Rectangular] or [Polygonal] for the shape of detection areas you want to set in the video display area. For details on detection area setting operations, see "Setting Detection Areas" (p. 110). Admin Tools [Quick setting] The detection area is drawn automatically when the detection criteria is [Removed Object Detection]. [Clear] If the [Area Shape] is [Polygonal], the detection area set in the video display area is deleted. (3) [Display Color] Choose the color of the detection setting. The color selected here becomes the display color of the detection area/line in the video display area. (4) [Object Size (%)] [Change Ratio (%)] [Duration (Sec)] Set the lower limit for the size, change ratio, and judgment time for the set detection area to trigger detection. If the value set here is exceeded, "Detected" mode is triggered. Click the text box to enter a value directly, or specify a value using the slider. For details on the setting method, see "Setting Detection Criteria per Detection Type" (p. 111). (5) [Clear detection line] Clears the detection line set in the video display area. (6) [Passing Direction] Select the passing direction of a moving object relative to the detection line. (7) [Decision Point] Select the point of a moving object that will be used as criteria for passing detection when a moving object crosses a detection line. Important It is recommended that the detection criteria are set in a condition as close as possible to the condition in which the camera is actually used. Perform a detection test in advance to make sure that the detection frame continues to be displayed for a subject targeted for passing detection. 109