Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 43
SNMPv3 Server, User Name], ecurity Level], Authentication Algorithm], Authentication Password]
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc SNMPv3 Server (1) [User Name] When [Enable] is selected in [SNMPv3], set the user name for using SNMPv3. 3 (2) [Security Level] Select [No authentication and no encryption], [Authentication but no encryption] or [Authentication and encryption] for the SNMPv3 security level. Setting Page (3) [Authentication Algorithm] When [Authentication but no encryption] or [Authentication and encryption] is selected for [Security Level], select [MD5] or [SHA1] for the authentication algorithm. (4) [Authentication Password] When [Authentication but no encryption] or [Authentication and encryption] is selected for [Security Level], set the authentication password. (5) [Encryption Algorithm] When [Authentication and encryption] is selected for [Security Level], select [DES] or [AES] for the encryption algorithm. (6) [Encryption Password] When [Authentication and encryption] is selected for [Security Level], set the encryption password. Note • The information set in the camera is read-only from the SNMP manager. • Use the SNMP Manager that supports SNMP MIB2 (supporting RFC1213). 43