Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 53
[RTP] RTP Server, Audio Multicast and RTP Streaming, RTP Server, Audio Multicast, RTP Streaming 1 to 5
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
[RTP] RTP Server, Audio Multicast and RTP Streaming 3 Setting Page The following can be set here. • RTP Server Enable RTP, and set the RTSP authentication method and port number. • Audio Multicast Make settings for multicast audio transmission. • RTP Streaming 1 to 5 Make settings for RTP streaming of video, multicasting, and audio transmission. value reaches 0, the signal can no longer be distributed. For example, if TTL is set to [1], multicast distribution is confined to the local segment only and cannot be distributed by the router. RTP Streaming 1 to 5 You can make settings for each stream, RTP Streaming 1 to RTP Streaming 5, in a 5-session RTP stream distribution. RTP Server (1) [RTP] Set RTP to [Disable] or [Enable]. (2) [RTSP Authentication Method] Set the RTSP authentication method to [Basic Authentication], [Digest Authentication], or [No Authentication]. (3) [RTSP Port] Set the RTSP port number to 554 or in the range of 1024 to 65535. Normally [554] (factory default setting) is used. Audio Multicast (1) [Multicast Address] Set the multicast address for audio transmission in the range 224.0.0.0 to 239.255.255.255 (IPv4) or an address beginning with ff00::/8 (IPv6). To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)] (IPv6). (2) [Multicast Port] Set the multicast port number for audio transmission to an even number in the range 1024 to 65534. To disable Multicast, set to [0]. (3) [Multicast TTL] Set the effective scope of multicast distribution between 0 and 255. To disable Multicast, set to [0]. The TTL (Time To Live), representing the effective scope of multicast distribution, is decremented each time the signal passes through a router. When the (1) [Video Size] Select the video format (JPEG or H.264) and video size of the RTP stream. The video sizes for JPEG will vary depending on the [Video Size Set] configured in [Video] > [All Videos] (p. 50). The video sizes for H.264 will be determined according to the [H.264(1)] and [H.264(2)] settings configured in [Video]. In addition, [H.264(1)] and [H.264(2)] cannot be set for multiple RTP streams. (2) [Frame Rate] Set the frame rate if the RTP stream is JPEG video. For H.264, the frame rate is determined by the [Video] > [H.264(1)] or [H.264(2)] > [Frame Rate] setting (p. 51). (3) [Multicast Address] Set the multicast address for RTP streaming in the range 224.0.0.0 to 239.255.255.255 (IPv4) or an address beginning with ff00::/8 (IPv6). To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)] (IPv6). (4) [Multicast Port] Set the multicast port number for RTP streaming to an even number in the range 1024 to 65534. To disable Multicast, set to [0]. (5) [Multicast TTL] Set the effective scope of multicast distribution for RTP streaming between 0 and 255. To disable Multicast, set to [0]. The TTL (Time To Live), representing the effective scope of multicast distribution, is decremented each time the signal passes through a router. When the value reaches 0, the signal can no longer be distributed. For example, if TTL is set to [1], multicast 53