Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 110
Setting Event Operations [Event] tab, Setting Detection Areas
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab (1) (2) (3) Setting Detection Areas Set detection areas in the video display area. Setting a [Rectangular] detection area A rectangle is shown in the video display area. Move or resize that rectangle to set a detection area. (1) Specify the operation timing. (Multiple checkboxes can be selected.) [ON Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to ON. [OFF Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to OFF. [Detected mode Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed for as long as detected mode is active. (2) Specify the event operation. (Multiple checkboxes can be selected.) [E-mail Notification] checkbox When selected, e-mail notification is performed at the timing set in (1). [E-mail Notification] must be set in advance under [Upload] in the Setting page (p. 57). [Video Record] checkbox When selected, video record is performed at the timing set in (1). [Video Record Action] must be set in advance under [Event] in the Setting page (p. 60). (3) Operation of External Device Output [External Device Output for ON Event] checkbox Select this checkbox for enabling external device output at an ON event and select operation (active or inactive). [External Device Output for OFF Event] checkbox Select this checkbox for enabling external device output at an OFF event and select operation (active or inactive). Setting a [Polygonal] detection area Specify polygonal areas with a maximum of 32 angles. Click in the video display area to form the polygon point by point. Click on a previously set point to complete the polygon and set the enclosed area as the detection area. The set area can also be moved by dragging it. Setting a detection area using [Quick setting] [Quick setting] can be configured for [Removed Object Detection] only. 1 Temporarily remove the object whose removal you want to detect from the video display area. 2 Click [Restart intelligent function]. The background video is created. 3 Replace the object whose removal you want to detect in its original position. 4 Click [Quick setting]. An outline for the detection object is drawn using a polygon with up to 32 points. If there are multiple detection objects, the area is drawn around the largest object. 110