Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 78
Notification Level], Copy E-mail, ettings], erver Name], erver Port], ender From], Recipient To],
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
For details on log messages, see "List of Log Messages" (p. 156). (2) [Notification Level] Select [Error], [Errors and warnings], or [All] for the log message notification level. For details on log messages, see "Log Messages on the Camera" (p. 156). (3) [Copy E-mail Settings] Copy the mail settings used in [Upload] > [E-mail Notification] (p. 57). (4) [Mail Server Name] Enter the host name or IP address of the SMTP server (using up to 63 characters). (5) [Mail Server Port] Enter the port number of the SMTP server (factory default setting is [25]). (6) [Sender (From)] Set the e-mail address of the sender (using up to 63 characters). (7) [Recipient (To)] Set the e-mail address of the recipient (using up to 63 characters). (8) [Authentication] Select [None], [POP before SMTP] or [SMTP-AUTH] for the e-mail authentication method. Set an appropriate method according to the authentication method used by the SMTP server to send to. [User Name], [Password], [POP Server] If [POP before SMTP] is selected as the e-mail authentication mode, enter the user name and password as well as the host name or IP address of the POP server required for authentication. [User Name], [Password] If [SMTP-AUTH] is selected as the e-mail authentication method, enter the user name and password required for authentication. (9) [Subject] Enter the subject of the e-mail to be sent using up to 31 ASCII characters. (10)[Log Notification Test] Clicking [Exec] initiates a log notification test based on the settings currently entered. It is not necessary to click [Apply]. After entering a password, first click [Exec], then [Apply] the password. 78