Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 42
Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto, To set [Use DHCPv6], select [Enable] in [IPv6], then
![]() |
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
To set [Use DHCPv6], select [Enable] in [IPv6], then select [Enable] in [Auto (DHCPv6)]. (3) [Name Server Address (DHCP)] Select [Use DHCP] or [Use DHCP/DHCPv6] in [AutoSetting of Name Server Address] to display the name server address acquired from the DHCP server. (4) [Name Server Address (DHCPv6)] Select [Use DHCPv6] or [Use DHCP/DHCPv6] in [AutoSetting of Name Server Address] to display the name server address acquired from the DHCPv6 server. (5) [Host Name] You can register the host name of the camera in the name server. Characters A to Z, a to z, 0 to 9, "-" (hyphen), "_" (underscore) and "." (period) may be used up to 63 (single-byte) characters in length. (6) [Host Name Registration with DDNS] Select [Enable] to register the entered name server address and host name of the camera. (7) [Search Domain] Specify the host name, without specifying a domain name, for a server, such as the upload server, to search domains in the form "host name + domain name", where the domain names are specified in the server domain list. Enter a domain name and click [Add] to add the domain name to the search domain list. (8) [Search Domain List] A list of domain names added using [Search Domain] appears. The function queries DNS server for each domain name starting from the top of the list. Use the ▲▼ buttons on the right to change the order of the domain names. To delete a domain name, select one from the list and then click [Delete]. Important Do not use "_" (underscore) in [Host Name] and [Search Domain] in Internet Explorer 8/9/10/11. Note • Use [Host Name Registration with DDNS] if the camera IP Address Setting Method is [Auto (DHCP)] (p. 40). DNS server registration settings must be set in advance. Contact your System Administrator for the DNS server settings. • If the name server address 1 is unavailable, the name server address 2 will be accessed. However, the name server address 2 must be set in advance. mDNS (1) [Use mDNS] Set mDNS to [Disable] or [Enable]. If you use mDNS, the IP address and host name of the camera will be broadcast to other hosts on the network. SNMP (1) [Use SNMP v1 and v2c] Set SNMPv1, v2c use to [Disable] or [Enable]. Camera information can be referenced by the SNMP Manager if [Enable] is specified and SNMPv1 or v2c is used. (2) [Use SNMP v3] Set SNMPv3 to [Disable] or [Enable]. Camera information can be referenced by the SNMP Manager if [Enable] is specified and SNMPv3 is used. (3) [Administrator Contact Information] Set contact information (e-mail address, etc.) for the Administrator of the camera. Setting information can be referenced by the SNMP manager. (4) [Administration Function Name] Set the camera name used for administration. Setting information can be referenced by the SNMP manager. If left blank, the following will be used by default: VB-S30D VB-S31D VB-S800D or VB-S805D VB-S900F or VB-S905F (5) [Installation Location] Set information regarding the installation location of this camera. Setting information can be referenced by the SNMP manager. SNMP v1 and v2c Server (1) [Community Name] When [Enable] is selected in [SNMPv1, v2c], enter a community name to be used for SNMPv1 and v2c. The default setting is blank. 42
![](/manual_guide/products/canon-vbs805d-network-camera-vbs30dvbs31dvbs800dvbs805dvbs900fvbs905f-operation-guide-5a22eef/42.png)