Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 77
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance, Device Information
![]() |
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance 3 Setting Page The following items can be used here. • Device Information Display information about the current device. • Tool Display or Initialize Camera Settings, and Back Up/Restore Settings. • Log Notifications Set log message mail notifications. Device Information [Model Name], [Firmware Version], [Serial Number], [Build Number], [MAC address] Displays information about the currently connected camera. Tool (5) [Back Up Settings] Back up all settings, other than the date and time, to a memory card. The IP address, SSL or 802.1X certificates, and private key files are also backed up. (6) [Restore Settings] Restore all settings, other than the date and time, from a backup file on a memory card. The IP address, SSL or 802.1X certificates, and private key files are also restored. The camera reboots after settings are restored. Caution You must not turn off the camera while it is performing the [Restore Default Settings], [Back Up Settings] or [Restore Settings] operation. Turning off the camera at this stage may result in making it unable to boot correctly. Important • If the restored settings were backed up from a different camera, note that an address conflict on the network may occur. • When restoring settings on a camera, do not use backup files that were created with firmware versions newer than that of the camera. (1) [View Logs] Display a history of camera operations and connections to each viewer, etc. (2) [View Current Settings] Display a list of current settings. (3) [Reboot] The camera is rebooted. The camera angle will return to the home position. If a home position has not been registered, the camera will return to the factory default home position setting. See p. 98 for details on registering a home position. (4) [Restore Default Settings] Except for the following items, all user-defined settings will be discarded and restored to factory default settings after the camera is rebooted. - Administrator password - Network LAN, IPv4, IPv6 - Date and time - Host access restrictions for access control - SSL/TLS - 802.1X Note • It is recommended that you back up all current setting values before restoring factory default settings in [Restore Default Settings]. • The camera can be restored to factory default settings using the reset switch as well. Note, however, that this will reset all camera settings to factory default settings except for date and time (p. 168). Log Notifications (1) [Use log notifications] Set log notifications to [Disable] or [Enable]. Log messages, such as when errors occur, can be sent by e-mail when [Enable] is selected. 77
![](/manual_guide/products/canon-vbs805d-network-camera-vbs30dvbs31dvbs800dvbs805dvbs900fvbs905f-operation-guide-5a22eef/77.png)