Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 69
[SSL/TLS] Setting HTTP Communication Encryption, Certificates, Certificate Management
View all Canon VB-S905F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
[SSL/TLS] Setting HTTP Communication Encryption The following can be set here. • Certificates Create an SSL/TLS certificate. • Certificate Management Manage the SSL/TLS certificate. • Encrypted Communications Set the encrypted communication. 3 Important With regard to security, use a self-signed certificate where complete security does not need to be ensured through operation tests, etc. For system operation, it is recommended that you acquire and install a certificate issued by a CA. Certificate Management Setting Page Certificates (1) [Create Self-Signed Certificate] After entering each of the following settings, click [Exec] to create a self-signed certificate. Follow the instructions in the message and reboot. The certificate created will take effect after rebooting. Note Creating a certificate takes time, so it is recommended that you stop video transmission and upload processes. (2) [Certificate Status] If no certificate is installed, [Not Installed] will appear. If a certificate is installed, the validity period for the certificate will appear. (3) [Country (C)] Enter the country code. (4) [State/Province (ST)], [Locality (L)], [Organization (O)], [Organizational Unit (OU)], [Common Name (CN)] Enter state/province name, locality, organization name, organizational unit and common name in ASCII characters (spaces or printable characters). Enter a FQDN format host name, etc. to set the common name (required). (5) [Validity Period Start Date], [Validity Period End Date] Set the validity period of the certificate to be created in the range of 2001/01/01 to 2031/12/31 (required when creating a self-signed certificate). (1) [Generate Certificate Signing Request] Click [Exec] to create server private key and generate a certificate signing request. Once processed, the certificate signing request will appear in a separate window. Note Generating a certificate signing request takes time, so it is recommended that you stop video transmission and upload processes. (2) [Display Certificate Signing Request] Click [Exec] to view the details of the certificate signing request. (3) [Install Server Certificate] Perform this operation to install a server certificate. Click [Browse] to select the certificate file for installation, then click [Exec]. The certificate installed will take effect after rebooting. (4) [Install Intermediate Certificate] Perform this operation to install an intermediate certificate. Select the certificate file to be installed using [Browse] and click [Exec]. The installed certificate will take effect after rebooting. Note To install an intermediate certificate and a primary intermediate certificate, use a text editor or similar software to place them in the same file and install them as an intermediate certificate. (5) [Delete Certificate] Click [Exec] to delete the server certificate. However, if SSL communications are enabled, the certificate cannot be deleted. Set [HTTPS Connection Policy] to [HTTP] before deleting a certificate. The deletion will take effect after rebooting. 69